This insulator / clamp can be used as an end clamp or a normal insulator. Primarily for tape up to 40mm wide but also holds rope. Simply unscrew wing nuts, put tape behind clamp and tighten back the nuts to hold fencing tape or rope firm. To fit, screw clamp to fencing post.
* Simple tape fitting
* Screw to post
* Wing nut closing mechanism
* Up to 40mm wide tape
* Will take rope
Here are the Top Ten rules to make your electric fence work properly!
1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.
2 Make sure that the earthing is optimal.
3 Do not connect two conductive plastic wires by tying them – Use special conductors.
4 Fence wire/tape/rope must not be broken.
5 Use conductive material having the best possible conductivity – i.e. Low resistance.
6 Keep fence wire and earthing rod free from rust – Rust is an insulator.
7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.
8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.
9 With battery-driven energisers, check battery condition regularly.
10 Ensure that each point of the fence is live using an electric fence tester.
Para nuestra gama completa de Médicos visite SportsDirect
Código de producto: 014234